The IPv6 Fundamentals, Design, and Deployment (IP6FD) v4.0 course is an instructor-led course that is presented by Cisco Learning Partners to their end-user customers. This five-day course aims at providing network engineers and technicians that are working in the enterprise sector with the knowledge and skills that are needed to study and configure Cisco IOS Software IPv6 features. The course also provides an overview of IPv6 technologies, covers IPv6 design and implementation, describes IPv6 operations, addressing, routing, services, transition, and deployment of IPv6 in enterprise as well as in service provider networks, and includes case studies useful for deployment scenarios.
The course also includes remote labs.
Objectives
Upon completion of this session, you should be able to:
• Describe the factors that led to the development of IPv6 and possible uses of this new IP structure
• Describe the structure of the IPv6 address format, how IPv6 interacts with data link layer technologies, and how IPv6 is supported in Cisco IOS Software
• Implement IPv6 services and applications
• Understand the updates to IPv4 routing protocols needed to support IPv6 topologies
• Understand multicast concepts and IPv6 multicast specifics
• Evaluate the scenario and desired outcome and identify the best transition mechanism for the situation
• Describe security issues, how security for IPv6 is different than for IPv4, and emerging practices for IPv6-enabled networks
• Describe the standards bodies that define IPv6 address allocation, in addition to one of the leading IPv6 deployment issuesmultihoming
• Describe the deployment strategies that service providers might consider when deploying IPv6
• Describe case studies for enterprise, service provider, and branch networks
Prerequisites
The knowledge and skills that a learner must have before attending this course are as follows:
• Cisco CCNA certification:
◦Interconnecting Cisco Network Devices 1 (ICND1)
◦Interconnecting Cisco Network Devices 2 (ICND2)
• Understanding of networking and routing (on Cisco CCNP level, but no formal certification is required).
• Working knowledge of the Microsoft Windows operating system.
Who Should Attend
The primary audience for this course is as follows:
• Network engineers and technicians that are working in the enterprise sector.
Course Outline
• Module 1: Introduction to IPv6
• Lesson 1: Explaining the Rationale for IPv6
◦IP Address Allocation
◦History of IPv4
◦Next Generation of IP
◦IPv4 Workarounds
• Lesson 2: Evaluating IPv6 Features and Benefits
◦Features and Benefits of IPv6
◦IPv6 Addresses
◦IPv6 Autoconfiguration and Aggregation
◦Advanced IPv6 Features
◦Transition Strategies to IPv6
• Lesson 3: Understanding Market Drivers
◦Market Growth for IPv6
◦Native IPv6 Content
◦Drivers for Adoption
• Module 2: IPv6 Operations
• Lesson 1: Understanding the IPv6 Addressing Architecture
◦IPv6 Addressing Architecture
◦IPv6 Address Formats and Types
◦IPv6 Address Uses
◦Required IPv6 Addresses
• Lesson 2: Describing the IPv6 Header Format
◦IPv6 Header Changes and Benefits
◦IPv6 Header Fields
◦IPv6 Extension Headers
• Lesson 3: Enabling IPv6 on Hosts
◦Enabling IPv6 on Hosts
◦Enabling IPv6 on Windows
◦Enabling IPv6 on Mac OS X
◦Enabling IPv6 on Linux
• Lesson 4: Enabling IPv6 on Cisco Routers
◦Enabling IPv6 on Cisco Routers
◦IPv6 Address Configuration
◦Autoconfiguration
• Lesson 5: Using ICMPv6 and Neighbor Discovery
◦ICMPv6
◦ICMP Errors
◦Echo
◦IPv6 over Data Link Layers
◦Neighbor Discovery
◦Stateless Autoconfiguration
◦Value of Autoconfiguration
◦Renumbering
◦Cisco IOS Neighbor Discovery Command Syntax
◦Cisco IOS Network Prefix Renumbering Scenario
◦ICMP MLD
◦IPv6 Mobility
• Lesson 6: Troubleshooting IPv6
◦Cisco IOS IPv6 Configuration Example
◦Cisco IOS show Commands
◦Cisco IOS debug Commands
◦Cisco IOS debug Command Example
• Module 3: IPv6 Services
• Lesson 1: IPv6 Mobility
◦Introduction to IP Mobility
◦Mobile IPv6
◦Network Mobility Examples
• Lesson 2: Describing DNS in an IPv6 Environment
◦DNS Objects and Records
◦DNS Tree Structure
◦Dynamic DNS
• Lesson 3: Understanding DHCPv6 Operations
◦DHCPv6
◦DHCPv6 Operation
◦DHCPv6 Multicast Addresses
◦DHCPv6 Prefix Delegation Process
◦DHCPv6 Troubleshooting
• Lesson 4: Understanding QoS Support in an IPv6 Environment
◦IPv6 Header Fields Used for QoS
◦IPv6 and the Flow Label Field
◦IPv6 QoS Configuration
• Lesson 5: Using Cisco IOS Software Features
◦Cisco IOS Software Features
◦Cisco IOS IPv6 Tools
◦IPv6 Support for Cisco Discovery Protocol
◦Cisco Express Forwarding IPv6
◦IP Service Level Agreements
• Module 4: IPv6-Enabled Routing Protocols
• Lesson 1: Routing with RIPng
◦Introducing RIPng for IPv6
◦Examining RIPng Enhancements
◦Configuring RIPng
• Lesson 2: Examining OSPFv3
◦OSPFv3 Key Characteristics
◦OSPFv3 Enhancements
◦OSPFv3 Configuration
◦OSPFv3 IPsec ESP Authentication and Encryption
◦OSPFv3 Advanced Functionalities
• Lesson 3: Examining Integrated IS-IS
◦Integrated IS-IS Characteristics
◦Changes Made to IS-IS to Support IPv6
◦Single SPF Architecture
◦Multitopology IS-IS for IPv6
◦IS-IS IPv6 Configuration on Cisco Routers
• Lesson 4: Examining EIGRP for IPv6
◦EIGRP for IPv6
◦Cisco IOS EIGRP for IPv6 Commands
• Lesson 5: Understanding MP-BGP
◦MP-BGP Support for IPv6
◦IPv6 as Payload and Transport Mechanism in MP-BGP
◦BGP Peering Over Link-Local Addresses
◦BGP Prefix Filtering
◦MP-BGP Configuration and Troubleshooting
• Lesson 6: Configuring IPv6 Policy-Based Routing
◦Policy-Based Routing
◦Configure PBR
• Lesson 7: Configuring FHRP for IPv6
◦First-Hop Redundancy Protocols and Concepts
◦HSRP for IPv6
◦GLBP for IPv6
• Lesson 8: Configuring Route Redistribution
◦Route Redistribution
◦PE-CE Redistribution for Service Providers
• Module 5: IPv6 Multicast Services
• Lesson 1: Implementing Multicast in an IPv6 Network
◦IPv6 Multicast Addressing
◦PIM for IPv6
◦Rendezvous Points
◦MP-BGP for the IPv6 Multicast Address Family
◦How to Implement Multicasting in an IPv6 Network
◦IPv6 Multicast Application Example
• Lesson 2: Using IPv6 MLD
◦Multicast Listener Discovery
◦MLD Snooping and MLD Group Limits
◦Multicast User Authentication and Group Range Support
• Module 6: IPv6 Transition Mechanisms
• Lesson 1: Implementing Dual-Stack
◦Dual-Stack Applications
◦Dual-Stack Node
◦The Dual-Stack Approach
• Lesson 2: Describing IPv6 Tunneling Mechanisms
◦Overlay Tunnels
◦Manually Configured Tunnels
◦Automatic Tunnels
• Module 7: IPv6 Security
• Lesson 1: Configuring IPv6 ACLs
◦IPv6 ACLs
◦IPv6 ACL Configuration
◦Reflexive and Time-Based ACLs
◦Cisco IOS IPv6 Header Filtering
◦Cisco IOS New ICMPv6 Types
◦Editing of ACLs
◦How to Configure ACLs in an IPv6 Environment
• Lesson 2: Using IPsec, IKE, and VPNs
◦IPsec, IKE, and VPNs Basics
◦IPsec and IKE
◦VPN Connections Using IPv6
• Lesson 3: Discussing Security Issues in an IPv6 Transition Environment
◦Dual-Stack Issues
◦Tunnel Security Issues
◦NAT-PT Security Issues
◦ICMP Traffic Requirements
• Lesson 4: Understanding IPv6 Security Practices
◦Threats in IPv6 Networks
◦Build Distributed Security Capability
◦Hide Topology when Possible
◦Secure the Local Link
◦ICMPv6 at EdgeManage ICMPv6 Traffic
◦Develop Mobility Support Plan
◦Use Transition Mechanisms as Transport
◦Secure the Routing Plane
◦Deploy an Early-Warning System
• Lesson 5: Configuring Cisco IOS Firewall for IPv6
◦Cisco IOS Firewall for IPv6
◦IPv6 Inspection on ISRs
◦Implement IPv6 Inspection on ISRs
◦Zone-Based Policy Firewall for IPv6 on ISRs
◦Configuring Zones and Zone Pairs
◦Configuring a Basic OSI Layer 3 to 4 Interzone Access Policy
◦Troubleshooting the Zone-Based Policy Firewall
• Module 8: Deploying IPv6
• Lesson 1: Examining IPv6 Address Allocation
◦IPv6 Internet
◦IPv6 Address Allocation
◦Connecting to the IPv6 Internet
• Lesson 2: Understanding the IPv6 Multihoming Issue
◦IPv6 Multihoming Aspects and Issues
◦IPv6 Multihoming Status
• Lesson 3: Identifying IPv6 Enterprise Deployment Strategies
◦Enterprise Networks
◦Impacts of Network Services
◦WAN Networks
◦Dual Stack: Advantages and Disadvantages
◦Tunneling: Advantages and Disadvantages
• Module 9: IPv6 and Service Providers
• Lesson 1: Identifying IPv6 Service Provider Deployment
◦IPv6 Service Provider Deployment
◦Dual-Stack Deployment
◦IPv6-Only Deployment
◦Encapsulation
◦IPv6 Services
◦Key Service Provider Strategies
◦Service Layer Address Allocation
◦Encapsulation Support
• Lesson 2: Understanding Support for IPv6 in MPLS
◦MPLS Operations
◦IPv6 over MPLS Deployment Scenarios
◦IPv6 Tunnels Configured on CE Routers
◦IPv6 over Layer 2 MPLS VPN
◦Cisco 6PE
◦How to Deploy Cisco 6PE on MPLS Networks
• Lesson 3: Understanding 6VPE
◦Cisco 6VPE
◦Configuring 6VPE
• Lesson 4: Understanding IPv6 Broadband Access Services
◦IPv6 Rapid Deployment
◦Customer Link Encapsulations
◦FTTH Access Architecture
◦Cable Access Architecture
◦Wireless Access Architecture
◦DSL Access Architecture
• Module 10: IPv6 Case Studies
• Lesson 1: Planning and Implementing IPv6 in Enterprise Networks
◦Enterprise Network Definition
◦Implementing IPv6 in an Enterprise Campus Network
◦IPv6 in an Enterprise WAN Network
• Lesson 2: Planning and Implementing IPv6 in Service Provider Networks
◦Service Provider Network Design
◦Native IPv6 Deployment in Service Provider Access Networks
◦Native IPv6 Deployment in the Service Provider Core Network
◦6PE Deployment in the Service Provider Core Network
• Lesson 3: Planning and Implementing IPv6 in Branch Networks
◦Branch Deployment Overview
◦Branch Deployment Profiles: Single-Tier Profile Implementation
Lab Outline
• Lab 2-1: Enabling IPv6 on Hosts
• Lab 2-2: Using Neighbor Discovery
• Lab 3-1: Using Prefix Delegation
• Lab 4-1: Routing with OSPFv3
• Lab 4-2: Routing with IS-IS
• Lab 4-3: Routing with EIGRP
• Lab 4-4: Routing with BGP and MP-BGP
• Lab 5-1: Multicasting
• Lab 6-1: Implementing Tunnels for IPv6
• Lab 7-1: Configuring Advanced ACLs
• Lab 7-2: Implementing IPsec and IKE
• Lab 7-3: Configuring Cisco IOS Firewall
• Lab 9-1: Configuring 6PE and 6VPE
